Buy Selank Peptide in Australia
Buy Selank in Australia from Macropus Peptides in two freeze-dried research strengths, 5mg and 10mg. Selank is a synthetic seven amino acid peptide built from tuftsin, a short fragment of immunoglobulin G, extended with a Pro-Gly-Pro tail that slows its breakdown by enzymes. Laboratories use it to study GABAergic gene expression, monoamine turnover and peptidase inhibition in rodent and cell models. Both vials are priced and ready for checkout, the 10mg fill at the lower cost per milligram, and a ready-mixed nasal spray and a starter kit are listed separately. Each vial carries a printed label with compound, strength, lot number and storage temperature, and the certificate of analysis for that lot is available whenever you ask. Order online, add bacteriostatic water if your bench is out of diluent, and the parcel ships from local Australian stock to any Australian address. Supplied for in-vitro research only, to buyers aged 18 and over, never for human or veterinary use.
| Compound | Selank |
|---|---|
| Amount | 5 mg |
| Form | Lyophilised powder |
| Category | Longevity and cognitive |
| Storage | -20 °C, protect from light |
| Testing | HPLC purity 98% or higher and mass spectrometry identity, every batch |
| Certificate of analysis | Available for every lot, matched to the lot number on the label |
Selank 5mg vial
Enter the diluent volume added to this vial to see the solution concentration. Laboratory calculation only, not dosing guidance.
Buy Selank Australia: 5mg and 10mg Vials
Macropus Peptides stocks this heptapeptide in two priced lyophilised strengths, 5mg and 10mg, for Australian laboratories working on neuropeptide and neuroimmune signalling. Both are filled from the same controlled synthesis and released by lot, so moving between them changes the quantity of powder and nothing else. The same peptide is also listed as a ready-mixed nasal spray and inside two kits.
Selank Australia: what the peptide is
Selank is a synthetic heptapeptide with the sequence Thr-Lys-Pro-Arg-Pro-Gly-Pro. Its first four residues reproduce tuftsin, a tetrapeptide cut naturally from the Fc portion of immunoglobulin G and long studied for its effects on immune cells. On its own, tuftsin is broken down within minutes. Researchers in Moscow added the tripeptide Pro-Gly-Pro to its carboxyl end, a proline-rich tail that resists peptidases, and the result was a more durable molecule that has been registered in Russia since the 2000s. Everywhere else, including Australia, it is a research compound with no approved use.
Selank peptide: how the heptapeptide works in research
Unlike most peptides we supply, it has no single receptor assigned to it, so work on it follows several threads at once. One thread is gene expression: studies measure how it shifts transcription of GABA-A receptor subunits and transporters in brain tissue and neuronal cell lines. A second is peptidase activity, because the heptapeptide inhibits enzymes in blood serum that normally degrade enkephalins and other short regulatory peptides. A third comes from the tuftsin core, which links it to cytokine and immune gene regulation. The Pro-Gly-Pro tail is a glyproline, a family of small peptides with activity of their own, which gives researchers a reason to compare it with its sister peptide Semax, which carries the same tail on a different core.
Selank research: what the published studies show
The English-language record is modest in size but specific. A 2001 paper in Bioorganicheskaia Khimiia measured how this peptide and Semax inhibit enkephalin-degrading enzymes from human serum in vitro. Frontiers in Pharmacology published a 2016 study of GABAergic gene expression in rat frontal cortex after administration, and a 2017 follow-up in the same journal repeated that gene panel in cultured IMR-32 neuroblastoma cells alongside GABA and olanzapine. A 2017 Behavioural Neurology study examined the peptide with diazepam in rats kept under unpredictable chronic mild stress, recording behaviour in standard tests. Much of the older literature is in Russian journals. Each paper, with its model and what it measured, sits in our Selank research studies library.
Selank vial specifications
| Specification | Detail |
|---|---|
| Compound | Selank |
| Amount | 5 mg |
| Form | Lyophilised powder |
| Category | Longevity and cognitive |
| Storage | -20 °C, protect from light |
The powder is a white freeze-dried cake of the acetate salt, sealed in glass under a crimped aluminium cap; the free peptide has a molecular weight close to 752 g/mol. Its label records compound, strength, lot and the freezer temperature of minus 20 °C. Quote that lot when you want the certificate of analysis, and store the vial dark until the day it is mixed. Three of its seven residues are proline, which is part of why the chain holds up better against serum enzymes than tuftsin alone.
Selank price: 5mg and 10mg vial cost in Australia
| Strength | Price | Price per mg |
|---|---|---|
| Selank 5mg | $59.99 | $12.00 per mg |
| Selank 10mg | $99.99 | $10.00 per mg |
Both strengths have a published Australian dollar figure and are ready for checkout. The 10mg vial holds twice the peptide of the 5mg vial for about two thirds more, so it carries the lower cost per milligram; the 5mg vial is the cheaper ticket into a first assay. Buyers who also need diluent and consumables can compare it with the Selank starter kit, and groups running both glyprolines side by side can price the nootropic kit, which holds this peptide and Semax in separate vials.
Selank 10mg: the strength labs order
The 10mg vial is the one most laboratories ask for. It holds enough heptapeptide to run a full expression panel or a series of cell experiments from one lot, which keeps batch variation out of the comparison. Two millilitres of diluent turn this vial into a 5 mg/mL stock; four millilitres halve that for finer working dilutions. Buy it in the starter kit instead and a small diluent vial, a set of fine syringes and a box of swabs come with it, enough to reconstitute and portion the peptide on the day it arrives.
Selank 5mg: the pilot vial
The smaller fill is meant for a first look at the compound in a new assay, or for groups that like a fresh vial for each short experiment. A single millilitre brings it to 5 mg/mL, the concentration the 10mg vial reaches with double the water, and 2.5 mL takes it to 2 mg/mL. Because it holds half the peptide, less material sits in solution once the vial is opened.
Selank vial or nasal spray: which to order
We sell the peptide two ways. The lyophilised vial suits laboratories that set their own concentration and diluent and want the longest shelf life, since dry powder is far more stable than solution. The ready-mixed nasal spray is a separate listing, dispensed already dissolved: 15mg in 10 mL, or 1.5 mg per mL. The 10mg vial made up with 2 mL is more than three times as concentrated, and the vial reaches the spray's strength with about 6.7 mL. For protocol flexibility and cold storage over months, the vial is the usual choice.
Where to buy Selank in Australia
- Sold online at macropuspeptides.com in 5mg and 10mg, priced from $59.99
- Every batch HPLC tested to 98% or higher purity, with identity confirmed by mass spectrometry
- A certificate of analysis for every lot, matched to the lot number printed on the label
- Same-day dispatch from Australian stock for orders paid before 2pm AEST on a business day
- Tracked delivery Australia wide: standard in 2 to 5 working days, express in 1 to 2 working days
- Payment by PayID or bank transfer, with your order ID as the reference
How to get Selank: ordering online
- Pick the 5mg or 10mg vial, or the starter kit
- Set the vial count in your cart
- Add bacteriostatic water if needed
- Declare adult research use, then pay
- Record the lot code, then request the matching certificate
Selank calculator: bac water volumes for each strength
Concentration is milligrams of peptide over millilitres of water. Common stock volumes:
- 10mg vial, 1 mL: 10 mg/mL
- 10mg vial, 2 mL: 5 mg/mL
- 10mg vial, 4 mL: 2.5 mg/mL
- 10mg vial, 5 mL: 2 mg/mL
- 5mg vial, 1 mL: 5 mg/mL
- 5mg vial, 2.5 mL: 2 mg/mL
For molar work, 5 mg/mL of the free peptide is about 6.6 millimolar, and diluting that stock a thousandfold leaves about 6.6 micromolar; check the certificate for salt content before converting. Our calculator handles any other volume. Pick up bacteriostatic water 10mL at the same checkout, or browse lab supplies for other diluents.
Is Selank available in Australia
Only as a laboratory research chemical. No ARTG entry exists for this heptapeptide, nor any TGA approval for use in people, which is why our sales stop at in-vitro work. Unregistered peptides can be caught by amendments to the Poisons Standard, so read the current schedule against your institution's work before ordering.
Selank for sale Australia wide: neuropeptide delivery
Orders for the heptapeptide are dispatched from Australian stock, and academic, institute and commercial laboratories from Cairns to Hobart and across to Perth receive them the same way. Many buyers pair this vial with Semax or order both peptides together as the 10mg plus 10mg blend. DSIP and further neuropeptides sit in our longevity and cognitive range.
References
- Selank administration affects the expression of some genes involved in GABAergic neurotransmission. Frontiers in Pharmacology. 2016.
- GABA, Selank, and Olanzapine affect the expression of genes involved in GABAergic neurotransmission in IMR-32 cells. Frontiers in Pharmacology. 2017.
- Semax and selank inhibit the enkephalin-degrading enzymes from human serum. Bioorganicheskaia Khimiia. 2001.
Scientific content compiled from the peer-reviewed literature above by the Macropus Peptides technical team. Information is provided for research reference only.